Email:info@hbwanli.com  Tel:+86-27-85513916
NEWS DETAIL
Home » News » What is disposable cap?

What is disposable cap?

Views: 49     Author: Site Editor     Publish Time: 2022-07-25      Origin: Site

Since the outbreak of pneumonia caused by a novel coronavirus, masks, disinfectant and other medical and health protective products have become scarce items. People are paying more and more attention to hygiene and health safety. Today we are going to learn about disposable caps.


The following knowledge points are listed below:

What is a disposable cap

Requirements for the use of disposable caps

How to choose a disposable cap.

disposable-peaked-cap-for-wowen42155793309


① What is a disposable cap

Disposable caps are cut and sewn from a single layer of nonwovens. Used to prevent clinical medical staff hair, dandruff fall off,

Instead of reusing the cap, avoid iatrogenic cross infection.

Mainly used for clinical medical personnel in hospital operating room, ward, outpatient service and other places to use. It is suitable for providing protection for medical personnel and isolating contaminants.

Description of division: the division of product specifications: according to the circumference of the cap ring, the height of the cap. This division does not change the specifications of the products

Performance indicators and intended use.

The disposable operating cap is designed to prevent the operator's hair from falling in the operating room during the operation, which will pollute the sterile environment of the operating room. The existing surgical caps are mostly disposable surgical caps made of non-woven fabrics. When wearing the caps, the folded surgical caps should be unfolded first, and then the caps should cover the front and back hairlines and above the ears on both sides to make the hair not leak out. Disposable caps are caps worn by medical units during operations and examinations. Therefore, disposable surgical caps and surgical masks should be correctly worn.

Properly wearing disposable surgical caps and surgical masks is not only beautiful but also safe, but also a two-way barrier to protect patients and medical staff.


② Requirements for the use of disposable caps

Structure: Disposable cap consists of cap top and cap ring.

Material requirements: The disposable cap is made of nonwoven material, with a total weight of no less than 30g/m°.

Specifications and dimensions: the specifications and dimensions of disposable caps shall conform to the requirements in Table 1.

Resistant microorganism penetration: Resistant microorganism penetration dry state: should conform to YY/ T0506.2-2009 Table 1 standard performance (non-critical area of product)

Requirements.

Cleanliness, particulate matter: shall comply with YY/ T0506.2-2009 Table 1 Performance (non-critical area of product)

Requirements.

Floating: shall meet the requirements of YY/ T0506.2-2009 Table 1 standard performance (non-critical area of the product).

Impervious water resistance: should meet the requirements of YY/ T0506.2-2009 Table 1 standard performance (non-critical area of the product).

Sterility: The disposable cap should be sterile after sterilization with epoxy zane.

The residue of ethylene oxide: the residual amount of ethylene oxide is less than 10μg/g when the disposable cap leaves the factory.

Appearance: The surface of the disposable cap should be clean, uniform in thickness, soft in hand and free from damage.

The sewing of disposable caps should be reasonably tight, the line should be straight, there should be no jumper, the starting and stopping needle and the return needle should be firm; Flanging width uniform and neat, symmetrical parts should be basically the same.


③ How to choose a disposable cap.

The selection of disposable caps must meet certain criteria, including the following conditions:

Structure: Disposable cap consists of cap top and cap ring.

Material requirements: The disposable cap is made of nonwoven material, with a total weight of no less than 30g/m°.

Specifications and dimensions: the specifications and dimensions of disposable caps shall conform to the requirements in Table 1.

Resistant microorganism penetration: Resistant microorganism penetration dry state: should conform to YY/ T0506.2-2009 Table 1 standard performance (non-critical area of product)

Requirements.

Cleanliness, particulate matter: shall comply with YY/ T0506.2-2009 Table 1 Performance (non-critical area of product)

Requirements.

Floating: shall meet the requirements of YY/ T0506.2-2009 Table 1 standard performance (non-critical area of the product).

Impervious water resistance: should meet the requirements of YY/ T0506.2-2009 Table 1 standard performance (non-critical area of the product).

Sterility: The disposable cap should be sterile after sterilization with epoxy zane.

The residue of ethylene oxide: the residual amount of ethylene oxide is less than 10μg/g when the disposable cap leaves the factory.

Appearance: The surface of the disposable cap should be clean, uniform in thickness, soft in hand and free from damage.

The sewing of disposable caps should be reasonably tight, the line should be straight, there should be no jumper, the starting and stopping needle and the return needle should be firm; Flanging width uniform and neat, symmetrical parts should be basically the same.


Hubei Wanli protective products co., LTD., established a mask workshop in 1998. As the market for disposable products becomes more and more diversified and integrated, Hubei Wanli is determined to meet the wider needs of global customers. We specialize in respirators, disposable protective clothing and accessories for the occupational safety and healthcare industry.


Leave a Message

About MEDICA

Hubei Wanli is supplying industry-leading clients based on trusted relationship.

Quick Link

Products

Contact Us

Manager:Julie Nie 
Tel:+86-27-85513916 / +86-13807226800 
Add:Yuanshi, Ganhe Town, Xiantao City, Hubei Province, China
 2021 Hubei Wanli Protective Products Co., Ltd. All rights reserved.
Supported  by  leadong.com | Sitemap